Home Photos How to Seamlessly Add Zipper Pockets to Your Pants- A Step-by-Step Guide

How to Seamlessly Add Zipper Pockets to Your Pants- A Step-by-Step Guide

by liuqiyue

How to Put Zipper Pockets on Pants

Adding zipper pockets to pants can be a great way to enhance their functionality and style. Whether you’re a beginner or an experienced sewist, this guide will walk you through the process of putting zipper pockets on pants. With a few simple steps and some basic sewing supplies, you can create a professional-looking addition to your wardrobe.

Materials Needed

Before you start, gather the following materials:

– Pants with the desired pocket placement
– Zipper (the size will depend on the pocket size)
– Pockets (you can either purchase pre-made ones or create your own)
– Fabric to match the pants
– Scissors
– Pins
– Sewing machine or needle and thread
– Measuring tape
– Iron and ironing board

Step 1: Measure and Cut the Pockets

First, measure the desired pocket size and cut out the fabric accordingly. If you’re using pre-made pockets, skip this step. Make sure to add seam allowances to the fabric pieces.

Step 2: Prepare the Zipper

Take the zipper and place it on the wrong side of the fabric. Make sure the zipper pull is in the center of the pocket opening. Pin the zipper in place, ensuring it’s aligned with the fabric edges.

Step 3: Sew the Zipper to the Fabric

Using a zipper foot on your sewing machine, sew the zipper to the fabric. Start at the bottom of the zipper and sew up to the top, making sure to backstitch at the beginning and end. If you’re hand-sewing, use a needle and thread to do the same.

Step 4: Attach the Pockets to the Pants

Position the pocket on the pants, making sure it’s centered and aligned with the pocket opening. Pin the pocket in place and sew around the edges, leaving the top of the pocket open. Backstitch at the beginning and end of the seam.

Step 5: Hem the Pocket Opening

Fold the top of the pocket opening down and press with an iron. Pin the hem in place and sew along the edge, securing the hem.

Step 6: Test the Zipper

Pull the zipper pull to ensure the pocket opens and closes smoothly. If it’s not working properly, check the stitching and make any necessary adjustments.

Step 7: Finishing Touches

Congratulations! You’ve successfully added a zipper pocket to your pants. Now, enjoy the added convenience and style. If you’re happy with the results, consider adding more zipper pockets to other garments in your wardrobe. Happy sewing!

You may also like