How to Make a Sewing Machine Cover with Pockets
Embarking on a sewing project can be both exciting and challenging. One essential accessory that every seamstress should have is a well-crafted sewing machine cover with pockets. Not only does it protect your sewing machine from dust and spills, but it also provides convenient storage for your essential tools and supplies. In this article, we will guide you through the process of making a sewing machine cover with pockets, ensuring that your workspace is both stylish and functional.
Materials and Tools Needed
Before you start, gather the following materials and tools:
– Fabric: Choose a durable fabric that is easy to clean, such as denim or canvas.
– Thread: A coordinating thread color for sewing.
– Scissors: A pair of sharp fabric scissors.
– Sewing machine: A fully functional sewing machine.
– Pins: A set of straight pins for holding fabric pieces together.
– Ruler: A clear ruler for measuring and marking fabric.
– Fabric pen or chalk: For marking fabric.
– Pockets: Fabric pieces for the pockets (optional, depending on the design).
Step 1: Measure and Cut Fabric
Begin by measuring the dimensions of your sewing machine. Add a few inches to each side for seam allowances. Cut two pieces of fabric to these dimensions. If you are adding pockets, cut additional fabric pieces for the pocket linings and outer fabric.
Step 2: Prepare the Pockets
If you are adding pockets, fold the pocket fabric in half lengthwise and press a crease. Open the fabric and fold the long edges inward by 1/4 inch and press. Then, fold the edges over again by 1/4 inch and press. Topstitch along the folded edges to create a clean finish. Repeat this process for each pocket.
Step 3: Attach the Pockets
Position the pockets on the outer fabric pieces where you want them to be placed. Pin the pockets in place, making sure to align the top edges of the pockets with the top edges of the outer fabric. Sew the pockets to the outer fabric using a straight stitch, leaving the bottom edges of the pockets open.
Step 4: Assemble the Cover
Place the two outer fabric pieces right sides together. Pin the pieces together along the sides and bottom edges, leaving the top edge open. Sew the pinned edges using a 1/2-inch seam allowance. Trim the excess fabric and corners, then turn the cover right side out.
Step 5: Attach the Pockets to the Cover
Pin the pocket linings to the inside of the cover, matching the top edges. Sew the linings to the cover using a straight stitch, leaving the bottom edges open. Press the seams open and turn the cover right side out.
Step 6: Add Finishing Touches
To give your sewing machine cover a professional finish, topstitch along the top edge of the cover. You can also add a decorative trim or button for a more personalized touch.
Congratulations! You have successfully created a sewing machine cover with pockets. Now, enjoy a well-organized and stylish workspace that will make your sewing projects more enjoyable and efficient.
