How to Change Battery in Dodge Challenger Key Fob
Replacing the battery in your Dodge Challenger key fob is a relatively simple task that can be done at home without the need for professional assistance. Whether your key fob has stopped working or you simply want to prevent future issues, this guide will walk you through the process step by step.
First, gather the necessary tools and materials. You will need a flathead screwdriver, a replacement battery (CR2032), and a pair of gloves to protect your hands from any sharp edges. Once you have everything ready, follow these steps to change the battery in your Dodge Challenger key fob:
1.
Locate the battery cover on the back of the key fob. It is usually held in place by a single screw. Use the flathead screwdriver to remove the screw and set it aside.
2.
Slide the battery cover off of the key fob. Be careful not to lose any small parts that may be inside the cover.
3.
Remove the old battery from the key fob. It is usually held in place by a small clip or adhesive. Gently pull the battery out, taking care not to damage the contacts.
4.
Insert the new battery into the key fob, making sure that the positive (+) side of the battery is facing up. The contacts should click into place, securing the battery in place.
5.
Replace the battery cover and secure it with the screw you removed earlier. Make sure it is tight to prevent any water or debris from entering the key fob.
6.
Test the key fob to ensure that it is working properly. If it still does not work, double-check that the battery is properly installed and that the contacts are clean.
By following these steps, you should be able to successfully change the battery in your Dodge Challenger key fob. Remember to keep the key fob away from water and extreme temperatures to ensure its longevity. If you encounter any issues or are unsure about the process, it is always best to consult a professional for assistance.
